181
Spine
C-Spine 2
nd
reconstr.
kV 130
Effective mAs 150
Slice collimation 1.0 mm
Slice width 3.0 mm 1.25 mm
Feed/Rotation 6.0 mm
Rotation time 1.0 sec.
Kernel B31s B60s
Increment 3.0 mm 0.8 mm
Image order cr-ca
CTDI
Vol
19.8 mGy
MPRthick: C-Spine sagittal
Image thickness 3
Distance between images 3
Number of images 20
For the 2
nd
reconstruction the Autoload into the MPR
Range on the 3D Card is activated. The images will be
automatically loaded into 3D, MPR, and a sagittal
MPRthick Range will pop up.
Please notice, if you are not satisfied with the Range
preset adapt the parameters to your needs and link them
to the series.
To Next Page
Loading...
