Card partially in container Card fully in container
• Close the container and rotate locking ring. The fitted card should appear as shown
below.
Card in container – unlocked ✓ Card in container - locked
• Re-connect connectors and power up the controller.
If a Licence Smart Card is already fitted to the controller then the licence is installed using the
Licence Manager to transfer the licence from the Smart Card used for distribution to the Smart
Card fitted to the controller.
Licence Manager
The Licence Manager can be used to:
• View licences installed on the controller
• Transfer a licence to the controller
• Transfer a licence off the controller
The Licence Manager is found on the web page:
Status and Configuration → System → Settings → Licence System → Manager
To view the licence information, press the 'Read Licences' button.
To Next Page
Loading...
