Siemens Stratos Outstation - Page 52

Mobility, Intelligent Traffic Systems
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 52 of 92
Version 3 Status Issued
Last Editor Alan Doyle Date 05-Oct-2017
Document Name Stratos Outstation General and ICM Handbook Document No. 667/HB/52250/000
Copyright © Siemens plc 2014. All Rights Reserved. Mobility and Logistics is a division of Siemens Plc
Figure 17 – Intelligent Detector Backplane Wiring
When defining a system it is important to consider the number of single detectors, IDBs
and Stratos outstation along with rack size to determine the build format. Table 22 below
will help in the design phase to define the physical rack space required.
The function IO mapping for the IDB is shown in Table 21. When configuring the IO
mapping in the outstation this table should be consulted.
Detector Function Card/ Port Bit ID
1
Loop 1 Detect
GspiX.in.0
1
Loop 2 Detect
2
Loop 3 Detect
3
Loop 4 Detect
4
2
Loop 1 Detect 5
Loop 2 Detect
6
Loop 3 Detect 7
Loop 4 Detect
8
3
Loop 1 Detect
GspiX.in.1
1
Loop 2 Detect
2
Loop 3 Detect 3
Loop 4 Detect
4