Procedure
① Mounting holes on the enclosure ④ Fixing screws M8 or 5/16 UNF thread
② Mounting holes in the mounting bracket
(90° rotatable)
⑤ Fixing screws
③ Washer DIN 125 - 8.4
Figure 3-5 Mounting device to the wall with mounting bracket
1. Push the enclosure ① onto the mounting bracket ②.
2. Secure the enclosure ① with the fixing screws ④ and washers ③ onto the mounting
bracket.
3. Secure the mounting bracket to the wall.
Use suitable fixing screws ⑤.
Installing/mounting
3.6 Mounting the SITRANS TF dual chamber housing
SITRANS TH320/TH420/TR320/TR420/TF320/TF420
28 Compact Operating Instructions, 03/2018, A5E41865021-AA
To Next Page