Siemens VB578D0S0 - Appliance Door; Customer Service; Disposal; Troubleshooting

en Disposal
46
Fault Cause and troubleshooting
The display has
frozen or does not re-
spond.
Malfunction
1.
Switch off the fuse in the fuse box.
2.
Switch the fuse on after appox. 10seconds.
3.
If the malfunction occurs again, call customer service.
The appliance door
cannot be opened.
lights up on the dis-
play.
The appliance door remains locked until the cooking compartment has cooled down.
▶
Wait until the cooking compartment has cooled and ⁠goes out.
The door panels feel
warmer than before
after the door panels
have been removed
for cleaning.
The door panels have been inserted the wrong way round.
▶
Check whether the door panels have been inserted correctly.
→"Fitting the door panels", Page44
The cooling fan con-
tinues to run after op-
eration.
Not a fault. The cooling fan continues to run until the temperature that is selected in the ba-
sic settings has been reached.
→"Basic settings", Page38
Condensation water
on the appliance
door or condensation
water is dripping.
The appliance door does not close correctly.
▶
Check whether the appliance door is installed correctly and closes correctly.
→"Appliance door", Page43
Dirt on the seal.
1.
Check whether the seal is dirty, damaged or seated incorrectly.
2.
Clean or replace the seal, or ensure that it is seated correctly.
Normal condensation.
→"Condensation", Page34
A message with ap-
pears on the display.
Malfunction
▶
Set the function selector to the off position.
If the error message does not disappear, contact customer service.
Disposal
16 Disposal
Disposal
16.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
▶
Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.
This appliance is labelled in accord-
ance with European Directive
2012/19/EU concerning used elec-
trical and electronic appliances
(waste electrical and electronic equip-
ment - WEEE).
The guideline determines the frame-
work for the return and recycling of
used appliances as applicable
throughout the EU.
Customer Service
17 Customer Service
Customer Service
Function-relevant genuine spare parts according to the
corresponding Ecodesign Order can be obtained from
Customer Service for a period of at least 10 years from
the date on which your appliance was placed on the
market within the European Economic Area.
Note:Under the terms of the manufacturer's warranty
the use of Customer Service is free of charge.
Detailed information on the warranty period and terms
of warranty in your country is available from our after-
sales service, your retailer or on our website.
If you contact Customer Service, you will require the
product number (E-Nr.) and the production number
(FD) of your appliance.
The contact details for Customer Service can be found
in the enclosed Customer Service directory or on our
website.
This product contains light sources from energy effi-
ciency class G.
17.1 Product number (E-Nr.) and production
number (FD)
You can find the product number (E-Nr.) and the pro-
duction number (FD) on the appliance's rating plate.