de Troubleshooting
disturbance Cause and troubleshooting
Program starts
not.
Door is not closed.
1. Close the door.
2. To start the program, press .
Child lock is activated.
▶ → "
Deactivating childproof lock ", page 47
/ is activated.
▶ check if
→
"Keys", page 26
/ is activated.
Laundry is jammed in the door.
1. Open the door again.
2. Remove jammed laundry.
3. Close the door.
4th To start the program, press .
The detergent drawer is not pushed in all the way.
▶ Slide the detergent drawer up to
Stop a.
The intelligent dosing system pump is blocked.
1. Turn off the device.
2. Clean the pump unit.
→
"Cleaning the detergent drawer", page 55
3. If the display reappears, call customer service.
→
"Customer service", page 76
Note: You can start the washing program if you
deactivate the intelligent dosing system and dose
manually.
→
"Keys", page 26
Door cannot be opened is activated.
Continue the program by pressing Sling or
Pumping out select and press.
nen.
▶
Temperature is too high.
▶ Wait until the temperature has dropped.
▶ → "
Abort program ", page 46
The water level is too high.
▶ Start the program Pumping out.
Power failure.
▶ Open the door with the emergency release.
→
"Emergency release", page 74
66
To Next Page
Loading...
