Siemens WM14UP40 - Page 72

de Troubleshooting
disturbance Cause and troubleshooting
Detergent residue
de on the damp
laundry.
2. Empty the dosing container.
→ "Cleaning the detergent drawer", page 55
3. Clean the dosing container.
4th Refill the dosing container.
→ "Filling the dosing tank", page 48
Basic dosage not set correctly.
▶ When intelligent dosing is activated,
like the basic dosage → Page 49.
Detergent residue
de on the dry
laundry.
Detergents can contain water-insoluble substances
that are deposited on the laundry.
▶ Brush the laundry after washing and
Drying out.
Unsuitable detergent filled into the dispenser of the
intelligent dispensing system.
1. Check whether the detergent used is suitable.
→ "Detergents and care products", page 42
2. Empty the dosing container.
→ "Cleaning the detergent drawer", page 55
3. Clean the dosing container.
4th Refill the dosing container.
→ "Filling the dosing tank", page 48
Basic dosage not set correctly.
▶ When intelligent dosing is activated,
like the basic dosage → Page 49.
Inadequate cleaning
effect.
Basic dosage not set correctly.
▶ When intelligent dosing is activated, set
The basic dosage → Page 49 correctly.
Detergent or care products in the dosing containers of the
intelligent dosing system have thickened.
1. Check whether the detergent used is suitable.
→ "Detergents and care products", page 42
2. Empty the dosing container.
→ "Cleaning the detergent drawer", page 55
3. Clean the dosing container.
4th Refill the dosing container.
→ "Filling the dosing tank", page 48
Unsuitable detergent filled into the dispenser of the
intelligent dispensing system.
72