EasyManua.ls Logo

Sierra Wireless GL6110 User Manual

Sierra Wireless GL6110
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
WA_DEV_GL6100_PTS_001
002
May 24, 2010
AirLink GL Series
GL61x0 Product Technical
Specification and User Guide

Table of Contents

Questions and Answers:

Sierra Wireless GL6110 Specifications

General IconGeneral
ModelGL6110
CategoryModem
ConnectivityCellular
Operating Temperature-30°C to +75°C
Frequency BandsGSM: 850/900/1800/1900 MHz
Data TransferGPRS, EDGE
TechnologyGSM
BandsLTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28/B66, LTE-TDD: B38/B39/B40/B41, WCDMA: B1/B2/B4/B5/B8, GSM: 850/900/1800/1900 MHz
InterfaceUSB 2.0
CertificationsCE, FCC, RoHS

Summary

Important Notice

Safety and Hazards

Limitations of Liability

Patents

Copyright

Trademarks

Contact Information

Document History

1. Overview

1.1. Variants

Describes the two main variants of the GL61x0: GL6100 (RS-232) and GL6110 (USB).

1.2. Overall Dimensions

Lists the physical dimensions, weight, volume, and housing material of the GL61x0.

1.3. GSM/GPRS Features

Details the GSM/GPRS radio capabilities, including supported bands and GPRS class.

1.4. Connectors

Identifies the physical connectors present on the GL61x0 device.

1.5. Interfaces

Specifies the interfaces available for both GL6100 (UART) and GL6110 (USB) versions.

1.6. Environmental Compliance

Covers RoHS compliance and guidelines for product disposal according to WEEE directive.

2. GL61X0 Feature Set

2.1. Supported Bands

Explains the supported GSM frequency bands and how to switch between them.

2.2. Protection

Details the protection mechanisms against overvoltage, ESD, and filtering for interfaces.

3. GL61X0 Cables and Accessories

3.1. Adaptive Cable (for the GL6100)

Details the adaptive cable for the GL6100, including its pin assignments for different connectors.

3.2. Standard DB9 Cable (for the GL6100)

Describes the standard DB9 to DB9 cable used with the GL6100 and its pin assignment.

3.3. DC Cable (for the GL6100)

Details the DC cable used for power supply to the GL6100 and its pin description.

3.4. AC/DC Adaptor (for the GL6100)

Describes the AC/DC adaptor used with the GL6100 for power supply.

3.5. Micro-fit® USB Cable (for the GL6110)

Details the Micro-fit USB cable for the GL6110 and its pin description.

3.6. FME Antenna

Provides specifications and characteristics for the FME antenna.

4. Functional Specifications

4.1. Functional Architecture

Illustrates the global architecture of the GL6100 and GL6110 models.

4.2. RF Functionalities

Details the radio frequency components and supported frequency bands of the GL61x0.

4.3. Operating System

Describes the operating system of the GL61x0 and its functions.

5. Technical Specifications

5.1. Power Supply

Details the voltage ranges, maximum currents, and power supply defect consequences.

5.2. Mechanical Specifications

Provides mechanical drawing and constraints for connectors used with the GL61x0.

6. Interfaces and Peripherals

6.1. Front Interface

Details the front interface including SIM and LED status indicators.

6.2. Back Interface

Describes the back interface, including the 8-pin Micro-Fit connector and RF interface.

7. Using the GL61x0

7.1. Getting Started

Guides through the initial setup steps for the GL61x0, including SIM insertion and antenna connection.

7.2. Operational Status

Explains how to interpret the operational status of the GL61x0 via the red LED indicator.

8. Communicating with the GL61x0

8.1. Communications Testing for the GL61x0

Outlines steps for performing communication tests and troubleshooting connection issues.

8.2. Verifying the Received Signal Strength

Explains how to check the received signal strength using the AT+CSQ command.

8.3. Verifying the Network Registration

Guides on verifying network registration status using the AT+CREG? command.

8.4. Checking the Band Selection

Details how to check the selected GSM band using the AT+WMBS? command.

8.5. Switching Bands

Explains how to change the GSM band settings using AT+WMBS commands.

8.6. Checking the PIN Code Status

Describes how to check the SIM PIN code status using AT+CPIN? command.

8.7. Main AT Commands for the GL6100

Lists essential AT commands for starting and configuring the GL6100.

8.8. Echo Function

Explains how to enable or disable the echo function for AT commands.

9. Using the GL61x0 with Embedded SIM

9.1. Operation

Explains how to check the status of the embedded SIM using AT+CPIN? command.

9.2. Switching Between Embedded SIM and an External SIM

Details how to switch between embedded and external SIM using AT+WHCNF commands.

9.3. Software Configuration

Covers checking and configuring the SIM interface selection for the GL61x0.

10. GL61X0 Maintenance

10.1. Enabling/Disabling the Flash LED

Explains how to enable or disable the flash LED to reduce power consumption.

10.2. Resetting the GL61x0

Describes methods for resetting the GL61x0, either via AT command or power cycle.

10.3. Operating System Upgrade Procedure

Details the procedure for upgrading the GL61x0 operating system using X-modem.

11. Troubleshooting the GL61x0

11.1. GL6100 – RS232 Version

Troubleshoots communication issues specific to the GL6100 RS232 version.

11.2. GL6110 – USB Version

Troubleshoots communication issues specific to the GL6110 USB version.

11.3. Receiving “ERROR”

Explains the causes and handling of 'ERROR' messages in response to AT commands.

11.4. Receiving “NO CARRRIER”

Provides solutions for receiving 'NO CARRIER' messages during calls or data connections.

12. Power Consumption

12.1. Various Operating Modes

Lists and describes the different operating modes affecting power consumption.

12.2. GL6100 Power Consumption

Presents power consumption data for the GL6100 without the Sierra Wireless Software Suite.

12.3. GL6110 Power Consumption

Presents power consumption data for the GL6110 without the Sierra Wireless Software Suite.

12.4. Consumption Measurement Procedure

Outlines the procedure for measuring GL61x0 power consumption, including hardware and software setup.

13. Reliability Standards: Compliance and Recommendations

13.1. Reliability Compliance

States the GL61x0's compliance with various requirements and standards.

13.2. Applicable Standards Listing

Lists applicable standards for environmental testing and product reliability.

13.3. Environmental Specifications

Defines the operating classes and temperature ranges for the GL61x0.

13.4. Reliability Prediction Model

Details various stress tests like life, environmental resistance, and mechanical tests.

14. Recommendations When Using the GL61x0 on Trucks

14.1. Recommended Power Supply Connection on Trucks

Illustrates the recommended power supply connection for the GL61x0 in trucks.

14.2. Technical Constraints on Trucks

Highlights technical constraints and potential damage risks when connecting to truck electrical systems.

15. Certification Compliance and Recommended Standards

15.1. Certification Compliance

Details the GL61x0's compliance with safety, EMC, FCC, and IC standards.

15.2. Applicable Standards Listing

Lists applicable standards for 2G (R99/Rel.4) including GCF, NAPRD, and TS documents.

16. Embedded Peripherals

16.1. I/O Connector

Describes the 8-pin Micro-Fit I/O connector used on the GL6100 board.

16.2. SIM Card Socket

Recommends a specific SIM card connector for use with the GL61x0.

17. Recommended Connectors

17.1. GSM Antenna

Suggests manufacturers for GSM antennas and support for antenna adaptation.

18. Reference Documents

18.1. Sierra Wireless Software Documentation

Lists Sierra Wireless software documentation, including SDK guides and tutorials.

18.2. Firmware Documentation

Lists firmware documentation, including AT Commands Manual and Interface Guide.

18.3. Other Related Documentation

References other related documentation such as product technical specifications and cable guides.

18.4. General Reference Documentation

Lists general reference documents like I2C Bus Specification and ISO standards.

19. List of Abbreviations

20. Appendix A: Packaging

20.1. GL6100 2-Cable Package (antenna not included)

Lists the contents of the GL6100 2-cable package.

20.2. GL6100 Complete Cable Package

Lists the contents of the GL6100 complete cable package.

20.3. GL6110 Package

Lists the contents of the GL6110 package.

21. Appendix B: Product Labeling

21.1. Model and MSN Label

Details the information provided on the Model and MSN label.

21.2. IMEI and Approval Label

Details the information provided on the IMEI and Approval label.

22. Appendix C: Safety Recommendations (for Information Only)

22.1. RF Safety

Covers general RF safety, exposure, and efficient terminal operation guidelines.

22.2. General Safety

Details safety precautions related to driving, electronic devices, medical equipment, and aircraft.

Related product manuals