Sigma 2-16P User Manual

Operating Manual SIGMA 2-16P page 58 of 75
04/2007
Part no. Description
13021
Adapter for PCR-tube 0.2 ml, ∅ 5.85/6.95 x
20/23.4 mm, suitable for 11124, 12132, 12148,
polyallomer
13059
Adapter for 1 tube with screw cap 10-12 ml,
max. Ø 16.2/19 x 75 - 85 mm, e.g. 15000,
15010, 15039, suitable in 12139
15014
Reaction vials 0.4 ml (Beckman system),
polypropylene, 1 pack contains 100 pcs.,
suitable for 13000
15005
Reaction vials 0.5 ml, Ø 7.9/10 x 28/31 mm, 1
pack contains 100 pcs., suitable for 13002
15008
Reaction vials 1.5 ml, 1 pack contains 100 pcs.,
suitable for 11124, 12133, 12148
15040
Reaction vials 2.2 ml, 1 pack contains 100 pcs.,
suitable for 11124, 12133, 12148
15010
Polycarbonate tube with screw cap 12 ml,
∅ 16.1 x 81.1 mm, suitable for 12141, 13059
15000
ditto, Teflon
15039
ditto, polypropylene
15020
Polystyrene tube 15 ml, ∅ 17 x 100 mm,
suitable for 11191, 12072, 12073, 13012,
14030, 14034
15021
Polypropylene stopper for 15020, 15023
15023
Polypropylene tube 15 ml, ∅ 17 x 100 mm,
suitable for 12072, 12073, 13012, 14030, 14034
15115
Culture tube with screw cap 15 ml, pointed
bottom, suitable for 12072, 12073, 13060
15029
Teflon tube with screw cap 28 ml, Ø 25.3 x 96
mm, 12139, 14031
15030
Polycarbonate tube with screw cap 30 ml,
∅ 25.3 x 98 mm, suitable for 12139, 14031
15032
Polypropylene tube with screw cap 28 ml,
∅ 25.3 x 92 mm, suitable for 12139, 14032
13079
Bottom adapter for 1 tube 40-42 ml 15051,
15052, 15054, suitable for 12151
15049
Polycarbonate tube 50 ml, graduated 0 - 50 ml
in steps of 1 ml, ∅ 34 x 100 mm, suitable for
17950
15051
Teflon tube with screw cap 42 ml, ∅ 28.5 x 107
mm, suitable for 13079

Sigma 2-16P Specifications

General

Brand	Sigma
Model	2-16P
Category	Laboratory Equipment
Language	English