Sigma 2-16P - Page 59

Operating Manual SIGMA 2-16P page 59 of 75
04/2007
Part no. Description
15052
Polypropylene tube with screw cap 42 ml,
∅ 28.8 x 107 mm, suitable for 13079
15054
Polycarbonate tube with screw cap 40 ml,
∅ 28.8 x 107 mm, suitable for 13079
15151
Culture tube with screw cap 50 ml, pointed
bottom, suitable for 12151, 13150
15102
Polypropylene tube 120 ml, ∅ 45 x 100 mm,
suitable for 13097
15103
Polycarbonate tube 110 ml, ∅ 45 x 100 mm,
graduated 2 - 100 ml in steps of 2 ml, suitable
for 13097
Centrifuge glass tubes
Part no. Description
15007
Centrifuge glass tube 7 ml, ∅ 12 x 100 mm,
suitable for 13004, 14029
15027 ditto, graduated, 0 - 5.5 ml in steps of 0.1 ml
15015
Centrifuge glass tube 15 ml, ∅ 16 x 100 mm,
suitable for 12072, 12073, 13012, 14030
15024 ditto, graduated, 0 - 10 ml in steps of 0.1 ml
15025
Centrifuge glass tube 25 ml, ∅ 24 x 100 mm,
suitable for 13022, 14031, 17925
15026 ditto, graduated, 5 - 25 ml in steps of 1 ml
15050
Centrifuge glass tube 50 ml, ∅ 34 x 100 mm,
suitable for 14032, 17950
15056 ditto, graduated, 4 - 50 ml in steps of 1 ml
15100
Centrifuge glass tube 100 ml, ∅ 44 x 100 mm,
suitable for 11190, 13097
15106 ditto, graduated, 1 - 100 ml in steps of 1 ml
Further accessories available upon request.