Sigma SD15 User Manual

108
DPOF (DIGITAL PRINT ORDER FORMAT)
When printing images at a photo lab, it is possible to specify which photos
and quantity to print in advance, using the DPOF menu. This is also
available when making prints using a DPOF compatible printer.
WARNING !!
• In the case of RAW images (files with X3F extension), DPOF printing is not
possible.
1
During image reviewing, press to display the Modification Menu.
2
Use the arrows on the 4-way controller to select the DPOF Menu ( ).
3
Use the arrows on the 4-way controller to select the desired options and then
press the
button.
DPOF MENU
Select / Quantity
Set the print quantity by pressing the
buttons. To
set number of copies from multiple images, select the
image that you wish to print by pressing the
buttons and then set the print quantity for each image
by pressing the
buttons. Press the button to
apply the setting.
Select All Images
This option selects all still images on the card for
printing. Set print quantity by pressing the
buttons and press the button to apply the
setting.
Cancel All Selections
Reset all print quantity settings. Press the
buttons to select [OK] and press the button to
cancel all print quantity settings.
TIP
• Total number of print quantity (the total sum of print quantity for each image)
is displayed at the lower right of the monitor.

Sigma SD15 Specifications

General

Camera Type	Interchangeable Lens SLR Type Digital Camera
Image Sensor Size	13.8 x 20.7mm
Lenses Used	Sigma SA Mount Lenses
Picture Angle	Equivalent to 1.7x the focal length of a lens when used on a 35mm SLR camera.
Lens Mount	SA mount
Imaging Element Type	FOVEON® X3™ (CMOS)
Color Photo Detectors	14.06 Million (2652 Columns x 1768 Rows x 3 Layers)
Image Recording Format	Lossless compression RAW Data (12bit), JEPG
White Balance	8 Type (Auto, Sunlight, Shade, Overcast, Incandescent, Fluorescent, Flash, Custom white balance)
Viewfinder Type	Pentaprism SLR Viewfinder
Viewfinder Frame Coverage	98％ horizontal, 98％ vertical
Viewfinder Magnification	0.9x (50mm F1.4 at infinity)
Eyepoint	18mm
Diopter Adjustment Range	-3dpt to +1.5dpt
Auto Focus Type	TTL phase difference detection system
AF Operating Range	EV 0 to 18 (ISO100)
Focus Mode	Single AF, Continuous AF (AF Predict function), MF
Metering Systems	Evaluative Metering, Center-Weighted Average Metering, Center Area Metering, Spot metering
Metering Range	EV 1 to 20 (with 50mm F1.4 at ISO100)
Exposure Modes	(P) Program AE、(A) Aperture Priority AE、 (S) Shutter Speed Priority AE、(M) Manual
ISO Sensivity	ISO (50), 100, 200, 400, 800, 1600, (3200) *( )Extended Mode
Exposure Compensation	±3EV (in 1/3steps)
AE Lock	Push button type
Auto Bracketing	Three or five frames (in 1/3steps, Appropriate Exposure – Under Exposure – Over Exposure)
Shutter Type	Vertical-travel metal focal plane shutter, electronically controlled through entire speed range
Storage Media	SD Card / Compatible with SDHC, Multi Media Card
Aspect Ratio	3：2
Resolution	HI：2640 x 1760 MED：1872 x 1248, LOW：1312 x 880
Interfaces	USB 2.0, Video Out (NTSC／PAL)