81
AUTO ROTATE
It is possible to record the vertical image information to images.
Auto Rotate can be set in the Camera Set-up menu (P. 2 8) → [Auto Rotate].
Off
The vertical image information will not be recorded.
On
(default)
The vertical image information will be recorded.
● When vertically orientated images are reviewed, they will automatically rotate
and be displayed vertically.
● When vertically orientated images are reviewed in Sigma Photo Pro, they will
automatically rotate and be displayed vertically.
● When vertically orientated images are rotated by pressing Modification Menu
→ [Rotate], this rotated orientation will be stored.
● If the [Applied Rotate] in the Camera Set-Up menu (P.28 ) is set to [Off], the
vertically oriented images are displayed horizontally.
WARNING !!
• If the images are taken while the camera is pointed up or down, the vertical
position information may not be recorded properly.
To Next Page
Loading...
