118
COLOR LCD MONITOR MESSAGES
“No Memory Card”
► Please Insert the Card. (P. 34 )
“Card Error”
► Format card. If the error persists, replace with new card. (P. 36)
► The Card may be damaged.
“Card Locked!”
► The write protection switch of the card is in the ‘LOCK’ position. Eject the
card and then unlock the write protection switch on the card (P. 10)
“Card Full”
► Delete unwanted photos, choose a lower resolution setting, or use a
different card. (P.3 4 -35 ) (P.94-96)
“No images on Memory card”
► To review images, insert a card with valid SD15 images, capture new
images onto the card, or press
button again to turn off display.
“Cannot preview this image”
► It may have been taken by another camera or the image data may have
collapsed.
“Cannot magnify this image”
► It may have been taken by another camera or the image data may have
collapsed.
“Cannot save this image!”
► The Card may be damaged. Please transfer the data to another hardware
such as a PC and then format the Card in the PC. If the same message is
displayed, the Card may have collapsed. Please use a new card.
An error has occurred! Error code # # #.
► Turn the camera off and back on. If the problem persists, call Technical
Support and give them the error number.
To Next Page
Loading...
