120
Difficulty seeing the images on the color LCD monitor.
Dust or dirt has adhered to the color LCD monitor.
► Clean the color LCD monitor with a blower or eyeglass cloth. (P. 11 0)
The color LCD monitor is worn out.
► Please consult the retailer from which you purchased the camera or contact
the nearest Sigma Service Center.
Pictures are coming out blurred
The AF/M switch on the lens body is set to M.
► Set the AF/M switch on the lens to
AF
. (P.51 )
Hand movement or camera shake occurred when the shutter button was
pressed.
► To prevent blurring, press the shutter button more gently or use remote
controller, cable release switch or a tripod.
Cannot use the card
Image data on the card is corrupted.
► Format the card. (P. 3 6 )
The write protection switch of the card is in the ‘LOCK’ position.
► Eject the card and then unlock the write protection switch on the card (P. 1 0 )
Cannot delete images
Images may be locked.
► Unlock the images. (P. 98 -10 0 )
The write protection switch of the card is in the ‘LOCK’ position.
► Eject the card and then unlock the write protection switch on the card (P. 1 0 )
Incorrect date and time is shown
Date and time setting may be incorrect.
► Enter the correct date and time in the Set-up Menu. (P. 2 7 )
No image appears on the TV monitor
Video cable is not correctly inserted.
► Insert the video cable correctly. (P. 9 3 )
To Next Page
Loading...
