14-12
Paper flange
3 Rewind the end of roll paper.
Turn the paper flange in the direction indicated
in the illustration to such extent that the end of
the wrinkled roll paper is visible.
4 Cut the end of the paper.
While holding the end of the paper roll, cut it
with the cutter removing all of the wrinkled
paper.
A "Paper cutter position" label is affixed to
both ends of the space where the cutter blade
should be inserted. Insert the cutter blade into
the space beneath where the label arrow is
pointing. Slide the cutter blade along the space
and cut the paper.
◆ Take care not to hurt yourself or damage the device when
handling the cutter.
◆ Handle the cutter blade with care so that you do not break
it.
◆ Apply the cutter to the direction horizontally to the paper guide.
If not, paper may be wrinkled.
Caution
To Next Page
Loading...