EasyManua.ls Logo

Simaudio Moon 240i - Technical Specifications; Amplifier Performance Specifications

Simaudio Moon 240i
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
If your 240i reaches a dangerously high operating
temperature it will shutdown to avoid overheating
which can lead to physical damage inside the unit.
You will need to wait until the 240i cools down before
powering it up again. If this occurs repeatedly then
consult your MOON retailer for assistance.
If your 240i simply doesn’t power up, turn o
the main power switch and check the AC fuse on
the rear panel. If the fuse appears good, put it back
Specifications
into its socket and consult your dealer for assistance.
If the fuse appears blown, replace it with a fuse
of the same size and rating. Then turn on the main
power switch. If your 240i still doesn’t power up,
consult your MOON retailer for assistance.
Configuration Stereo
Class Of Operation – Amplifier Class A/B
Single-ended inputs 2 (RCA) pairs
Mini-jack input 1 (1/8”)
Input Sensitivity 370mV – 3.0V RMS
Input Impedance 22,100
Preamplifier / Subwoofer output 1 (RCA) pair
Headphone output 1 ( 1/4” Stereo TRS)
Output Power @ 8 50 Watts per channel
Output Power @ 4 85 Watts per channel
Gain 37dB
Signal-to-noise Ratio 100dB @ full power
Frequency Response 10Hz - 80kHz +0/-3.0dB
Crosstalk@ 1kHz -100dB
Intermodulation Distortion 0.005%
Total Harmonic Distortion (20Hz-20kHz @ 1W) 0.02%
Total Harmonic Distortion (20Hz-20kHz @ 50W) 0.02%

Related product manuals