Simrad AP80 User Manual

38 |
Work prole setup | AP70/AP80 Operator Manual
¼ Note: Refer to “Work profile setup” on page 33 for details about work profile settings.
Importing and exporting work proles (AP80 only)
It is possible to export and import a work profile to/from a USB stick.
Export
1. Press the WORK key to display all work profiles
2. Turn the rotary knob to select the edit icon on the work profile you want to export
3. Select Save to disk
- The Files dialog will be displayed
4. Select the USB
5. Press the MENU key and confirm your selection
¼ Note: only 6 characters can be used to identify the work profile.
Import
1. Select Add in the work profile dialog to create a new profile
1. Select Load Profile from disk
- The Files dialog will be displayed
2. Locate the file on the USB stick
¼ Note: The work profile files have .wpf extension!
3. Press the LEFT key or the rotary knob to access the file details
4. Select Import
5. Confirm your selection
6. Save the new work profile

Simrad AP80 Specifications

General

Brand	Simrad
Model	AP80
Category	Marine Equipment
Language	English