52 |
Menu overview | AP70/AP80 Operator Manual
System
User settings that have not any affect on autopilot
performance.
Advanced system settings
Work proles
Used for creating and managing the vessel’s work profiles.
Described in “Work profile setup” on page 33.
Alarms
Alarm listings and settings.
Described in “The Alarm dialog” on page 41.
Units
Units of measure used on display, in dialogs and menus.
Network
List of devices connected to the CAN bus network.
Used for setup, diagnostics and configuration.
See “System configuration” on page 53.
Installation
Includes dockside and seatrial calibrations.
See “System configuration” on page 53.
To Next Page
Loading...
Need help?
General
