To Next Page

To Previous Page

Chapter 8-6 CP33 Miscellaneous menu

Press [MENU] to exit and *reboot (only if loading “Setup”)

*) When the system makes a ‘reboot’ the screen will turn black for a

brief moment, then the system will re-start and automatically return

to the active display which was on the screen before you made the

transfer.

8.5 Data transfer via PC interface

Data transfer to and from a route planning program on a Personal

Computer can be made via NMEA connection (see section 10.7) by

means of the standard NMEA0183 sentences WPL and RTE.

 The data transfer on these two sentences does not include WP sym-

bol, color, XTE limit, etc. Refer to section 10.6 for information on

connection to PC.

Call up the menu bar, and...

6,4

load the Data transfer window

Data transfer

DataCard - see section 8.4

NMEA connection

Exit

Select the NMEA connection

WARNING!

Normal NMEA communication

will be interrupted.

Exit Accept

ENT

Simrad CP33 User Manual

Questions and Answers: