To Next Page

To Previous Page

CP33 Pilot menu & navigation examples Chapter 6-9

6.3 Anchor guard

Call up the menu bar, and...

4,5

activate the anchor guard function

-the chart display will provide an impression of the vessel’s position

in relation to the alarm circle.

To check/change the preset alarm distance:

Call up the menu bar, and...

4,1

load the highway display

ENT

enter the navigation setup display

Move cursor to the Anchor alarm distance

0-9

Enter new value with numeric keys

ENT

Confirm the change

To turn Anchor guard off again:

Call up the menu bar, and...

4, 2

turn anchor guard off

6.4 MOB alarm and navigation

The MOB - Man overboard - alarm and display will be activated if

you press the [MOB] key on the CP33 keypad and hold it depressed

for two seconds, or activate an external MOB switch (hold two sec-

onds). The MOB display will provide all relevant data for an effi-

cient rescue operation - refer to details on the rear of the front page.

To turn the MOB function off again:

Call up the menu bar, and...

4, 2

turn the MOB function off

To check the last activated MOB position:

Call up the menu bar, and...

6,2

select MOB position

Simrad CP33 User Manual

Questions and Answers: