Simrad CP33 - How to Get Started; Dedicated Function Keys

CP33 Introduction and safety summary Chapter 1-3
1.3 How to get started
PWR
Press and hold the [PWR] key until you have a picture on the screen
ENT
Press the [ENT] key to accept warning when the system is ready
Your present position will automatically be updated within a few minutes.
When ready, the ship symbol on the chart will flash and the *** will be
replaced by actual course and speed figures.
1.3.1 Dedicated function keys
Press the [CHART] key to toggle between:
CHART
 
2 sec.
Chart 2 Chart 2 + data field Chart 1
The [ECHO] key is a shortcut to:
ECHO
Depth & temperature diagram
Press the [PILOT] key to toggle between:
PILOT
  
Highway ETA & AVN Trim & highway
PAGE
Press the [PAGE] key to toggle between four user-selectable pages.