CP33 Setup menu Chapter 9-3
Setup for units
Depth altitude in - can be set to meters (m), feet (ft) or fathoms
(fm).
Distance in - can be calculated in nautical miles (nm), kilometers
(km) or statue miles (mi).
Speed in - can be shown in knots (kn), kilometers/hour (kh) or
miles/hour (mh).
Temperature in - can be shown in Celcius or Fahrenheit.
Software version - indicates which software version is installed in
the unit.
Serial number - indicates the unit’s serial number.
Interface software version - indicates which version is installed in
the unit (for technicians only).
GPS receiver type - indicates which type is installed in the unit (for
technicians only).
PAGE rotat ion inter val - can be set to anywhere between 03 to 99
seconds. Refer to “Fundamentals of the display and page system” in
section 2.1 for more details on how the function works.
Display text in - as standard the CP33 is supplied with the follow-
ing national display languages: Danish (DK), English (GB), English
(US), French (F), German (D), Italian (I), Nederlands (NL), Spanish
(E), Swedish (S), and Portuguese (P).
To Next Page
Loading...
Need help?
General
