Chapter 3-4 CP33 Chart menu and INFO windows
level range is switched off and the chart changes to a new level of
details.
The extended level range can be toggled OFF/ON in chart setup
(default = ON). See section 3.4 Chart setup.
Chart details may not be available in all scales in all areas. Non-
covered areas will be marked as hatched or all blue/white with
coordinate grid (when Grid is set to AUTO (default) in chart setup),
depending on the actual scale - see section 3.4 Chart setup for more
details in regard to what can be shown on the chart and what you
may choose not to have shown.
The built-in world chart can be zoomed up/down in six steps, from
a scale of approx. 1:33,000,000 to 1:2,000,000.
An over-zoom function enables you to zoom beyond the chart,
which automatically is switched off and replaced by a lat/long coor-
dinate grid. In this mode, the scale can go down to 1:600.
To Next Page
Loading...
Need help?
General
