CX34/44/54-series Installation 1-51
Chartplotter section
Chart system: C-MAP MAX or NT+
Presentation: Dual chart - two charts in individual scales and detail levels
Internal
memory: Dynamic storage with combinations of/or totals up to:
35,000 marks/waypoints
10,000 waypoints with name (25 characters)
50,000 trackpoints
50,000 line sections
1,000 routes
Radar section
Display modes: Head Up, North Up, True Motion, Dual Range.
Range scale: 0.125–48 nm in 11 steps or multi range.
Min. range: 30 meter
Range
resolution: 30 meter
Bearing
accuracy: 1° or better
Off-center: Max 66%.
Guard zone: Can be set at any desired distance and angle in any desired
width. IN and OUT modes are available.
Stretch: AUTO, PULSE, VIDEO.
Trail (wake): 30 sec., 1, 2, 5, 10, 15, 30 min. or permanent.
Radar radome multiVision scanners DX45 and DX60
Approvals: FCC part 80, FCCID TPADX6000105.
EU Declaration of Conformity, 1999/5/EC, EN60945.
Dimensions: DX45: Ø 465 mm (18.3”), H 261 mm (10.3“)
DX60: Ø 615 mm (24.2”), H 261 mm (10.3“)
Weight: DX45 = 10 kg (22 lb), DX60 = 11.5 kg (25.4 lb)
Range scale: DX45 = max. 28 nm, DX60 = max. 36 nm.
Input voltage:
12* and 24 V DC (10-32 V DC max) from display unit.
*)
24 V DC (14-32 V DC max) for scanner cables longer
than 20 m.
Consumption: 60 W (12V 5A) or less (Display and scanner)
Standby: 30 W (12V 2.5A) or less.
Environment: Waterproof to IP66. Temperature range: -25°C to +55°C (13°F
to 131°F). Other data according to IEC62252.
Transmitter:
4 kW solid-state modular driving magnetron, 9410 +/- 30 MHz
frequency, 0.07-0.7 μs pulse length.
Receiver: Semi-log, 5.5 dB, 64 MHz (nominal) IF frequency, 14/4 MHz
bandwidth.
To Next Page
Loading...
