7
Easy Mode
-
Easy mode can be set for printing speed-quality, material, support pattern, and inside filling.
-
For the 2X and 2X DP303, Cartridge No. is enabled.
Advanced Mode
-
This enables the user to change profiles to modify output values as he/she desires.
-
Custom profiles (= user-defined profiles) can also be edited in the advanced mode. (See 2.3 Custom Profile.)
Basic
<This applies to the default profiles of the slicer program.>
-
For the DP 201, DP 201 bed temperature and material settings are disabled.
To Next Page
Loading...
