Page 4
EN
EC Declaration of Incorporation acc. to Machinery Directive 2006/42/EC, Appendix II Part 1 B
The manufacturer, SKF Lubrication Systems GmbH, Hockenheim Plant, 2. Industriestrasse 4, DE - 68766 Hockenheim, hereby declares the conformity of
the partly completed machinery
Designation: Gear pump units
Type: UD* / UC*
Item number: 715-*
Year of manufacture: See rating plate
with the essential protection requirements of Machinery Directive 2006/42/EC at the time of placing on the market.
1.1.2 · 1.1.3 · 1.3.2 · 1.3.4 · 1.5.1 · 1.5.6· 1.5.8 · 1.5.9 · 1.6.1 · 1.7.1 · 1.7.3 · 1.7.4
The technical documentation described in Annex VII, part B of this Directive has been prepared. We undertake to transmit, in response to a reasoned request
by the national authorities, the special documents for this partly completed machine. The Head of Technical Standards is the authorized representative for
the technical documentation. See the manufacturer information for the address.
Furthermore, the following Directives and (harmonized) standards were applied in the applicable areas:
2011/65/EU RoHS II
2014/30/EU Electromagnetic Compatibility | Industry
Standard Edition Standard Edition
Standard Edition Standard Edition
DIN EN ISO 12100 2011 DIN EN 60947-5-1 2010
DIN EN 61000-6-2 2006 DIN EN 61000-6-4 2011
DIN EN 809 2012 DIN EN 61131-2 2008 Correction 2011 DIN EN 60947-5-1 2010
DIN EN 60204-1 2007 Correction 2009 DIN EN 61000-6-3 2011
Correction 2010 DIN EN 60034-1 2015 Correction 2012
DIN EN 50581 2013 DIN EN 61000-6-1 2007
The partially completed machinery must not be put into service until the machinery into which it is to be incorporated has been declared in conformity with
the provisions of Machinery Directive 2006/42/EC and all other applicable Directives.
Hockenheim, 2016,04,25
Jürgen Kreutzkämper
Manager R&D Germany
SKF Lubrication Business Unit
Stefan Schürmann
Manager R&D Hockenheim/Walldorf
SKF Lubrication Business Unit
EC Declaration of Incorporation
To Next Page
Loading...
Need help?
General
