Page 45
EN
7. Shutdown
7.1 Temporary shutdown
The described product can be temporarily shut
down by disconnecting the electrical, pneumatic,
and/or hydraulic supply connections.
The safety instructions in these assembly in-
structions must be observed when doing so.
If the product is to be shut down for an ex-
tended period of time, follow the instructions
in Chapter 3, "Transport, delivery, and storage,"
in these operating instructions.
To recommission the product, follow the in-
structions in the Chapters "Assembly" and
"Commissioning" in the assembly instructions
and operating instructions.
7.2 Permanent shutdown
If the product will be permanently shut down,
the local regulations and laws regarding the
disposal of contaminated equipment must be
observed.
Lubricants can contaminate soil and bodies of
water.
Warning!
Lubricants must be properly used and
disposed of. Observe the local regulations
and laws regarding the disposal of
lubricants.
The product can also be returned to SKF
Lubrication Systems for disposal, in which case
the customer is responsible for reimbursing the
costs incurred.
7. Shutdown
To Next Page
Loading...
Need help?
General
