Page 48
EN
Warning!
Lubrication systems are pressurized
during operation. Lubrication systems
must therefore be depressurized before
starting assembly, maintenance or re-
pair work, or any system modifications
or system repairs.
9. Malfunction
The following tables provide an overview of
possible malfunctions and their causes.
Contact the Service department of SKF
Lubrication Systems if you cannot remedy the
malfunction.
Dismantling of the product or individual
parts thereof within the statutory war-
ranty period is not permitted and voids
any claims.
All assembly, maintenance and repair
work beyond this scope must be per-
formed by SKF Lubrication Systems
Service.
Only original spare parts from
SKF Lubrication Systems can be used.
Arbitrary alterations to products and
the use of non-original spare parts and
accessories are not permitted.
9. Malfunction
Warning!
Work on products that have not been
de-energized may result in bodily in-
jury. Assembly, maintenance and repair
work may only be performed on prod-
ucts that have been de-energized by
qualified technical personnel. The sup-
ply voltage must be switched off before
opening any of the product's
components.
Warning!
The hot surface of a motor may cause
burns. Motor surfaces may only be
touched with appropriate gloves or af-
ter the motor has been shut off for an
extended time.
To Next Page
Loading...
