SKF UC User Manual

Page 3
EN
Table of contents
Table of contents
Assembly instructions
UC and UD Gear pump unit 1
Service 2
Explanation of symbols and signs 5
1. Safety instructions 7
1.1 Intended use 7
1.2 Authorized personnel 7
1.3 Electric shock hazard 8
1.4 System pressure hazard 8
1.5 Compressed air hazard 8
1.6 Hydraulic pressure hazard 8
1.7 Explosion protection information 9
2. Lubricants 10
2.1 General information 10
2.2 Selection of lubricants 10
2.3 Approved lubricants 11
2.4 Lubricants and the environment 11
2.5 Lubricant hazards 12
3. Overview 12
4. Assembly 13
4.1 Setup and attachment 13
4.1.1 Assembly of the gear pump unit 14
4.2 UC/UD Assembly drawing 15
4.2.4 Use 16
4.2.5 Design 17
4.2.6 Series 1: Qnominal up to 3 l/min 18
4.2.7 Series 2: Qnominal up to 10.8 l/min 22
4.2.8 Series 3: Qnominal up to 36 l/min 28
4.3 Electrical motor connection 35
4.4 Lubrication line connection 36
4.4.1 Lubricant filling 36
4.5 Note on the nameplate 38
4.6 Information on CE marking 38
Operating instructions
39
1. Safety instructions 40
2. Lubricants 40
3. Transport, delivery, and storage 41
3.1 Lubrication units 41
3.2 Electronic and electrical devices 41
3.3 General notes 41
4. Assembly 42
4.1 Information on assembly 42
4.2 Assembly of pump unit 42
4.3 Housing versions 42
4.4 Dismantling and disposal 42
5. Design and function 43
5.1 General information43
5.2 Design and mode of operation of
the gear pump unit 43
6. Commissioning 44
6.1 Condition on delivery 44
6.2 Commissioning 44
7. Shutdown 45
7.1 Temporary shutdown 45
7.2 Permanent shutdown 45
8. Maintenance 46
8.1 General information 47
9. Malfunction 48
9.1 Commissioning malfunctions 49
10. Accessories 50
11. Spare parts 55

SKF UC Specifications

General

Brand	SKF
Model	UC
Category	Water Pump
Language	English