Page 40
EN
1. Safety instructions / 2. Lubricants
1. Safety instructions
Warning!
These operating instructions must be
read and properly understood by the
assembler and the responsible technical
personnel/operator before assembly
and commissioning.
The safety instructions listed in Chapter 1,
"Safety instructions," of the assembly instruc-
tions also apply without restrictions to these
operating instructions.
In addition to the operating instruc-
tions, general statutory regulations and
other binding regulations for accident
prevention and for environmental pro-
tection (recycling/disposal) must be ob-
served and applied.
2. Lubricants
Warning!
The information on lubricants listed in
Chapter 2, "Lubricants," of the assem-
bly instructions also applies without re-
strictions to these operating
instructions.
Disclaimer of liability
SKF Lubrication Systems Germany GmbH
shall not be held liable for damages:
Caused by contaminated or unsuitable
lubricants
Caused by the installation of non-original
SKF components or SKF spare parts
Caused by inappropriate usage
Resulting from improper assembly, config-
uration or filling
Resulting from improper response to
malfunctions
Caused by independent modification of
system components
Only media approved for these types of
pump units may be used. Unsuitable media
may result in pump unit failure and poten-
tially severe bodily injury and property
damage.
To Next Page
Loading...
