Page 42
EN
4. Assembly/connection
4.1 Information on assembly
The assembly procedure for gear pump units
is described in detail in the assembly instructions
associated with these operating instructions.
Information/instructions about assembling the
gear pump unit beyond the scope of the as-
sembly instructions are contained later in this
chapter.
4. Assembly
4.2 Assembly of pump unit
Assembly must be performed in accordance
with the included assembly instructions and
the additional information/instructions con-
tained in this chapter.
Warning!
The applicable national environmental
regulations and statutes are to be
adhered to when dismantling and dis-
posing of the multiline pump unit.
The product can also be returned to
SKF Lubrication Systems for disposal,
in which case the customer is respon-
sible for reimbursing the costs incurred.
4.4 Dismantling and disposal
4.3 Housing versions
The UC and UD gear pump units are vertically
or horizontally arranged units that are used in
hydraulic or circulating-oil lubrication systems.
All off-the-shelf lubricants and hydraulic oils
in the viscosity range of between 20 and 1000
mm
2
/s are conveyed.
To Next Page
Loading...
