Page 38
EN
Assembly instructions
4.5 Note on the nameplate
The nameplate on the oil lubrication pump
unit provides important data such as the type
designation, order number, barcode, and serial
number.
To avoid loss of this data in case the name-
plate becomes illegible, these characteristics
should be entered in the following table.
Enter key data from nameplate in the table.
Fig. 9 Key data from nameplate
Made in Germany
SKF Lubrication Systems Germany AG
0300279386
Material No.
Destription
Manufacturing date
Serial No.
4.6 Information on CE marking
The CE marking is based on the require-
ments of the applied Directives:
○ 2014/30/EC Electromagnetic
Compatibility
○ 2011/65/EU (RoHS II) Directive on the
restriction of the use of certain hazar-
dous substances in electrical and electro-
nic equipment
Note on Low-Voltage Directive 2014/35/EU
The protection objectives of the Low-Volta-
ge Directive 2014/35/EU are met in accor-
dance with Annex 1, No. 1.5.1 of Machinery
Directive 2006/42/EC.
Note on Pressure Equipment Directive
2014/68/EU
Due to its performance characteristics, the
product does not reach the limit values
defined in Article 4, Paragraph 1, Subpara-
graph (a) item (i) and is, pursuant to Article
4, Paragraph 3, excluded from the scope of
Pressure Equipment Directive 2014/68/EC.
To Next Page
Loading...
Need help?
General
