Page 41
EN
3. Transport, delivery, and storage
Warning!
The product must not be tilted or
dropped.
3. Transport, delivery, and storage
SKF Lubrication Systems Germany GmbH prod-
ucts are packaged in accordance with standard
commercial practice according to the regulations
of the recipient's country and DIN ISO 9001.
During transport, safe handling must be en-
sured and the product must be protected from
mechanical effects such as impacts.
The transport packaging must be marked
"Do not drop!".
There are no restrictions for land, air or sea
transport.
After receipt of the shipment, the product(s)
must be inspected for damage and for com-
pleteness according to the shipping documents.
The packaging material must be kept until any
discrepancies are resolved.
SKF Lubrication Systems Germany GmbH
products are subject to the following storage
conditions:
3.1 Lubrication units
Ambient conditions: dry and dust-free
surroundings, storage in well ventilated
dry area
Storage time: max. 24 months
Permissible humidity: < 65%
Storage temperature: 10 - 40°C
Light: avoid direct sun or UV exposure
and shield nearby sources of heat
3.2 Electronic and electrical devices
Ambient conditions: dry and dust-free
surroundings, storage in well ventilated
dry area
Storage time: max. 24 months
Permissible humidity: < 65%
Storage temperature: 10 - 40°C
Light: avoid direct sun or UV exposure
and shield nearby sources of heat
3.3 General notes
The product(s) can be enveloped in plastic
film to provide low-dust storage.
Protect against ground moisture by stor-
ing on a shelf or wooden pallet.
Bright-finished metallic surfaces, espe-
cially wearing parts and assembly surfac-
es, must be protected using long-term
anti-corrosive agents before storage.
At approx. 6-month intervals: Check for
corrosion. If there are signs of corrosion,
reapply anti-corrosive agents.
Drives must be protected from mechani-
cal damage.
To Next Page
Loading...
Need help?
General
