951-170-022-EN
SKF Lubrication Systems Germany GmbH
2. Industriestrasse 4 ·68766 Hockenheim · Germany
Tel. +49 (0)62 05 27-0 · Fax +49 (0)62 05 27-101
www.skf.com/lubrication
SKF Lubrication Systems Germany GmbH
Motzener Strasse 35/37 ·12277 Berlin · Germany
PO Box 970444 · 12704 Berlin · Germany
Tel. +49 (0)30 72002-0 · Fax +49 (0)30 72002-111
www.skf.com/lubrication
The contents of this publication are the copyright of the publisher and may not be reproduced
in whole or in part without permission of SKF Lubrication Systems Germany GmbH. Every
care has been taken to ensure the accuracy of the information contained in this publica-
tion. However, no liability can be accepted for any loss or damage, whether direct, indirect
or consequential, arising out of use of the information contained herein.
All SKF products may be used only for their intended purpose as described in these as-
sembly instructions with associated operating instructions. If assembly/operating instruc-
tions are supplied together with the products, they must be read and followed. Not all lu-
bricants can be fed using centralized lubrication systems. SKF can, on request, inspect the
feedability of the lubricant selected by the user in centralized lubrication systems.
Lubrication systems and their components manufactured by SKF are not approved for use
in conjunction with gases, liquefied gases, pressurized gases in solution, vapors or such
fluids whose vapor pressure exceeds normal atmospheric pressure (1013 mbar) by more
than 0.5 bar at their maximum permissible temperature.
Hazardous materials of any kind, especially the materials classified as hazardous by CLP
Regulation EC 1272/2008, annex 1, parts 2-5, may be filled into SKF centralized lubrica-
tion systems and compo-nents and delivered and/or distributed with the such systems and
components only after consulting with and obtaining written approval from SKF.
To Previous Page
Loading...
