Telephone operation
Enter telephone number
›
In the Telephone main menu, tap .
›
Enter the telephone number using the numeric
keypad that is displayed.
The displayed numeric keypad can also be used
for searching for contacts.
If, for example, the digits 32 are entered, contacts
with the letter sequence DA, FA, EB etc. are dis-
played next to the numeric keypad.
List of telephone contacts
The list of telephone contacts is imported from the
connected main telephone.
›
To display the contact list in the telephone main
menu, tap
.
›
To search within the list, tap
Enter contact
.
›
Enter the details you wish to find.
›
To establish a connection with a contact, tap the
functional area showing the desired contact.
If a contact has multiple telephone numbers, select
the telephone number from the displayed list.
›
To display the details for a contact, tap
.
Establish a connection to the voice mailbox num-
ber
›
In the Telephone main menu, tap .
Telephone conversation
Depending on the context of the telephone conver-
sation, the following functions can be selected.
End connection / reject incoming call / end call
Answer an incoming call / return to the held call
Switch the ringer o / on
Hold a call
Switch the microphone o / on
Show details of the caller
Answer a call from the second telephone during
a call on the first telephone
The ongoing call on the first telephone is termi-
nated by accepting the call.
›
To switch the call tone from the speakers to the
telephone, go to the telephone main menu and tap
on
hands-free
.
›
To switch the call tone from the telephone to the
speakers, tap .
Conference call
A conference call is a joint telephone conversation
with a minimum of three and a maximum of six par-
ticipants.
›
Make the next call during an ongoing conversation/
conference.
Or:
/
/
›
Accept a new incoming call by tapping the function
area .
›
To start a conference call, tap on the functional
area .
During an ongoing conference call, the following
functions can be selected depending on the context.
Hold the conference call and leave temporarily
(the conference will continue in the background)
Return to the conference being held
Switch the microphone o / on
End the conference
Show details of the conference call
In the details of the conference call, depending on
the connected telephone, the following functions
can be selected.
Show details of the conference call participants
End conversation with the conference call par-
ticipant
Conversation with a participant outside of the
conference call
Send a text message
›
In the Telephone main menu, tap
Messages
New text message
.
›
Write a text message and confirm; a view of the
message is displayed.
The message can be edited when the text area
within the view is tapped.
›
Search for or select the recipient of the message.
›
Add more recipients or confirm selected recipi-
ents.
›
Tap
Send
.
Display received text messages
›
In the Telephone main menu, tap
Messages
or .
›
Messages that are received are displayed as indi-
vidual messages or as messages in a conversation,
depending on the following setting.
In order to switch the display of messages in a
conversation on or o, go to the Telephone main
menu and tap
Show messages as a conversation
.
›
To switch on or o a graphic notification regard-
ing the receipt of a new message, go to the Tele-
phone main menu and tap
New message notifications
.
Infotainment oers the possibility to read the
text message (context-dependent) by means of the
generated Infotainment voice if is tapped.
Send E-mails
›
In the Telephone main menu, tap on
E-mails
New e-mail
.
›
Write an e-mail and confirm that an e-mail is dis-
played.
/
107
Infotainment Amundsen › Telephone
To Next Page
Loading...
Need help?
General
