• Cutout > Advanced settings tab
With this option, different cut settings can be assigned based on color. This works well in projects where
some paths need to be cut as dashed lines (also called pouncing) or in multiple-tool projects, such as
score and cut.
At the bottom of the Advanced settings window, a list of each color used in the project will appear with
the following options:
Cut in colour order: Marking this option will no longer cut shapes with respect to location in the project.
Instead, all shapes of the top color in the menu will be cut before cutting shapes of the next color and so
on down the list.
If using the Cut in colour order option, the order in which the colors are cut can be changed using the
up and down arrows below the menu of colors. First, click on a color from the menu and then move its
cut order as desired.
To the right of each color are the current Force, Speed, Passes, and Tool assigned to that color. Note
there are additional settings that can be made. To make changes, click on a color and then click on the
Edit attributes button below it. The follow window will open:
To Next Page
Loading...
