Material Type Material Brand/Source Blade Passes Force Speed
Chipboard 0.022" (0.5 mm) R 2 100 5 20 Brayer well and tape edges
Chipboard Cereal box 0.018" (0.4 mm) R 2 100 5 20 Brayer well and tape edges
Chipboard 0.03" (0.76mm) B 2 120 5 15 Brayer well and tape edges
Chipboard 0.015" (.38mm) R 1 80 5 15
Construction Paper Creatology - pink R 1 30 7 20
Construction Paper Pacon Tru-Ray - black R 1 35 7 20 Alt: 2 passes at Force = 30
0.02" PET-G with blue
protection sheets
B 2 130 3 15
Paper layer peeled off. Corners taped to
mat
Craft Plastic Dick Blick; 0.015" (0.38mm) B 2 110 3 15
Paper layer peeled off. Corners taped to
mat
Fabric - Cork embroiderygarden.com Y 2 50 5 15 Used an extra sticky mat
Fabric - Cotton Batik with Lite Steam-A-Seam 2 Y 1 65 5 20
Steam-a-Seam2 fused to wrong side, paper
removed and sticky side pressed down to
mat
with Lite Steam-A-Seam 2 Y 2 75 5 20
Steam-a-Seam2 fused to wrong side, paper
removed and sticky side pressed down to
mat
Fabric - Denim with Heat n Bond applied Y 3 115 7 20 Left paper layer on.
Fabric - Quilting
Cotton
with Heat n Bond applied Y 2 65 7 20
Fabric - Quilting
Cotton
with Lite Steam-A-Seam 2 Y 1 80 5 20
Alt: 2 Passes at Force = 70; Steam-a-
Seam2 fused to wrong side, paper removed
and sticky side pressed down to mat
Foam (Fun Foam) Michael's 0.07" (1.8mm) B 2 20 6 10
HTV refer to Vinyl - Heat Transfer
Label Sheets: water
resistent
Creative Label Concepts R 1 35 8 20 The Force is for kiss cutting the labels.
Leather 0.02" Bookbinding quality R 2 75 7 20
Leather ~ 0.06" B 2 100 4 10
Magnet 0.035" (0.9mm) B 2 120 5 10
Tape magnet to a sticky mat; may need
slower speed for accurate shapes
To Next Page
Loading...
