Skycut C24 - Page 87

87
Material Type Material Brand/Source Blade Passes Force Speed
Blade
Ht.*
Other Comments
Vinyl - Heat Transfer Easy Weed - white, navy R 1 40 6 20 Cut on mat
Vinyl - Heat Transfer GlitterFlex Ultra - Black R 1 50 8 20 Cut on mat
Vinyl - Permanent
Expressions Vinyl 51 Series -
Black
R 1 20 8 20 Cut on mat
Vinyl - Wall (no mat) Vinyl - Oracal 631 - yellow R 1 20 8 20 Not using a mat: note lower Blade Height
Vinyl - Wall (no mat) Vinyl - Oracal 631 - yellow R 1 25 8 20 Not using a mat
Vinyl - Wall (on mat) Vinyl - Oracal 631 - yellow R 1 20 8 20 Cut with vinyl on the mat
Wood Veneer
0.015" (0.4mm) from
cardsofwood.com
B 2 100 5 15 Taped to mat; tested both oak and walnut