lb. kg lb. kg psi
KPa
(kN/m
2
)
psf
KPa
(kN/m
2
)
min* 2400 1089 960 435 100 689.48 160 7.66
max* 3000 1361 1200 544 110 758.42 200 9.58
min* 2580 1170 1032 468 100 689.48 170 8.14
max* 3130 1420 1252 568 110 758.42 210 10.05
min* 3400 1542 1396 633 110 758.42 175 8.38
max* 4299 1950 1936 878 130 896.32 245 11.73
min* 4100 1860 1644 746 120 827.37 210 10.05
max* 4610 2091 1844 836 130 896.32 235 11.25
min* 4100 1860 1640 744 191 1316.90 146 6.99
max* 5620 2549 2250 1021 222 1530.64 199 9.53
min* 4700 2132 1880 853 206 1420.32 168 8.04
max* 5920 2685 2370 1075 224 1544.43 210 10.05
min* 5075 2302 2030 921 208 1434.11 180 8.62
max* 5775 2620 2310 1048 223 1537.53 205 9.82
60354AF-ANSI
*
**
NOTE:
MODEL
Total Aerial
Platform Weight
Total Aerial Platform Load
OUP**LCP**Wheel
OUP - Overall Uniform Pressure is a measure of the average load the aerial platform imparts on
the whole surface directly underneath it. The structure of the operating surface (beams, etc.) must
be able to withstand more than the indicated values above.
The LCP or OUP that an individual surface can withstand varies from structure to structure and is
generally determined by the engineer or architect for that particular structure.
min - Total aerial platform weight with no options
max - Aerial platform weight + all options + full capacity
LCP - Locally Concentrated Pressure is a measure of how hard the aerial platform presses on
the areas in direct contact with the floor. The floor covering (tile, carpet, etc.) must be able to
withstand more that the indicated values above.
3215
3220
4626
4632
4620
3226
3219
To Next Page
Loading...
