SJ85AJ 208932AEA
15
Safety Precautions Section 2 – Operator Safety
DO NOT ascend or descend a
grade steeper than 45% (4WD).
Boom elevated driving must only
be done on rm, level surfaces.
DO NOT operate an MEWP
that has ladders, scaffolding or
other devices mounted on it to
increase its size or work height. It
is prohibited.
DO NOT exert horizontal
(manual) force on MEWP that
exceeds the limits specied in
Section 7.7.
DO NOT use the MEWP as a
crane. It is prohibited.
DO NOT climb on boom arm
assembly. It is prohibited.
DO NOT sit, stand or climb on
the guardrails. It is prohibited.
AVOID overhead obstructions.
Be aware of overhead
obstructions or other possible
hazards around MEWP when
lifting or driving.
AVOID crushing hazards. Be
aware of crushing hazards when
lifting or driving. Keep all body
parts inside the MEWP.
BE AWARE of blind spots
when operating the MEWP.
ENSURE that there are no
personnel or obstructions in the
path of travel, including blind
spots.
DO NOT lower the platform
unless the area below is clear of
personnel and obstructions.
DO NOT use boom to push,
pull other objects or to lift the
chassis.
DO NOT raise the MEWP while
it is on a truck, forklift or other
device or vehicle.
STUNT driving and horseplay are prohibited.
DO NOT use with improperly
inated/damaged tires or wheels.
Refer to Section 4.2-7: Wheel/Tire
Assembly.
DO NOT alter or disable limit
switches or other safety devices.