Skyjack SJ85AJ User Manual

208932AEA SJ85AJ
40
Section 4 – Pre-operation Visual & Daily Maintenance Inspections
Fuel Leaks
▪
Ensure that there are no fuel leaks.
WARNING
Engine fuels are combustible. Inspect the MEWP
in an open, well-ventilated area away from heaters,
sparks and ames. Always have an approved re
extinguisher within easy reach.
▪
Ensure fuel tank, hoses and ttings show
no visible damage and no evidence of fuel
leakage.
4.2-7 Base
1
Turret Transportation Lock
▪
Ensure turret transportation lock is unlocked,
there are no loose or missing parts and there
is no visible damage.
Drive Axles
▪
Ensure front drive axle
2
and rear drive axle
3
are properly secured, there are no loose
or missing parts, all ttings and hoses are
properly tightened and there is no evidence of
hydraulic leakage.
4
Tie Rod
▪
Ensure there are no loose or missing parts,
tie rod end studs are locked and there is no
visible damage.
5
Oscillating Cylinder Assembly
▪
Ensure oscillating cylinder assembly is
properly secured and there are no visible
gaps, loose or missing parts, all ttings and
hoses are properly tightened and there is no
evidence of hydraulic leakage.
NOTE
Oscillating axle is locked when MEWP is in low
speed. Refer to Figure 31 - Axle Oscillation
Diagram.
1
3
2
4
5
5

Skyjack SJ85AJ Specifications

General

Brand	Skyjack
Model	SJ85AJ
Category	Lifting Systems
Language	English