SJ85AJ 208932AEA
89
SJ85AJ Section 8 – Labels
Description Label Pictorial
14
Annual Inspection
Ensure that work platform has received annual inspection prior
to operation.
15
Emergency Lowering Procedure
Refer to Operating manual.
1. Ensure engine is off.
2. Pull out emergency stop button.
3. Turn off/base/platform key switch to base position.
4. Select emergency power position from start/function
enable/emergency power switch and activate desired boom
function to lower platform.
1 2
4
STOP
+
=
3
!
TM
16
Tie Down Points
Only use these points for tying down.
17
EWPA Clearance Requirements
Clearance requirements for operating non-insulated mobile
plant, including elevating work platforms near power lines.
18
Warning - Do Not Alter
Do not alter or disable limit switches or other safety devices.
Control Side (Continued)
14
15 16
17
18
18
Front View
18
18
To Next Page
Loading...
