HDMI
GB 8
HDMI Connection
Connect the receiver and the TV set via a HDMI connection cable. This connection provides you with
perfect and lossless picture and sound quality for your TV set.
The receiver automatically switches to the HDMI output as soon as a TV is connected to the receiver by
means of an HDMI cable.
The screen resolution at the HDMI output can be optimised using the MODE button. Please note that
the picture may disappear when the resolution is changed. In order to maintain an overview in this case,
the resolution is briefly displayed in the display of the unit (e.g. 480i, 720P, 1080). For optimum display
on a modern flat screen device we recommend the setting 1080i_50 or 720p_50.
To achieve the connection, we recommend the use of a conventional Scart and a HDMI connection
cable, since the HDMI input is not preset as standard on every TV set. It is also possible to access and
adapt the set-up menus via the conventional Scart cable should the screen remain blank.
Setting up the picture and sound connection:
All the necessary possibilities can be found in the section “System Settings”.
The following video signals are supported:
HDMI: The HDMI output provides you with perfect picture and sound quality. Note: The device has a
standardised HDMI output. Nevertheless, picture and sound interferences may occur at TV sets with
first generation HDMI inputs.
In this case, select one of the following connection options.
RGB: Extremely high-quality picture and sound transmission via a conventional (21-pole) Scart cable.
YUV: Very high quality image output via the 3 cinch sockets “YPbPr” for connecting a TV or a beamer.
Dolby Digital Sound (AC3)
Please note that if the channel broadcasts Dolby Digital Sound, this is only available via the digital
sound output or the HDMI output if this is connected to an external AV receiver.
To Next Page
Loading...
