34
SLAYER STEAM X USER MANUAL
Use a soft, clean towel to wipe the surfaces of the machine. Do not use abrasive
cleaners. Small amounts of window cleaner may be used on glass and metal
components.
Immediately after steaming milk, clean the exterior of the steam wand by wiping it
thoroughly with a damp towel, then clear the interior by briefly moving the steam
actuator up to the “purge” position.
If clogging occurs, soak the steam wand in hot water for several minutes, then
purge while submerged. For tough clogs, use an approved espresso machine
steam wand cleaning solution.
Clean the Machine Exterior Clean the Steam X Wands
To Next Page
Loading...
