• Blind portafilter
insert
REQUIRED TOOLS
• Group brush or non-fiber towel and a
blunt end object
RECOMMENDED SUPPLIES
• Soft, clean towel
PROCEDURE
1. Remove portafilter from grouphead, then use a cleaning
brush to scrub the portafilter gasket, loosening oil and
coffee grounds.
2. Replace portafilter basket with a blind insert and lock it in
the grouphead.
3. Press and release the jog wheel above the grouphead to
activate the menu.
4. Rotate the jog wheel counterclockwise to the “Fast Clean”
setting
5. Press and release the jog wheel to enter the “Fast Clean”
setting. The option to select a cleaning program will be
presented.
6. Press and release the jog wheel to select and initiate Fast
Clean.
7. Follow the prompt on the screen to remove the portafilter
from the grouphead, then press and release the jog wheel to
continue.
8. Remove the blind insert from the portafilter and use a damp
towel to wipe oil and grounds from portafilter body.
9. Rinse the portafilter with hot water, then insert the portafilter
basket and lock it in the grouphead.
10. Repeat all steps for each grouphead, as needed. This feature is
available per group and intuitively placed last on the menu for
counter clockwise turn to, quick activation.
FAST CLEAN
Designed to be done without the use of detergent after the busy
portion of the day, at the shift change or when changing out the
coffees in the hopper. Leave the screen, screw in place.
Complete the following steps for each grouphead whenever your
machine requires minor cleaning.
INCLUDED PARTS
37
SLAYER STEAM X USER MANUAL V1.1 | SEPTEMBER 2019
To Next Page
Loading...
Need help?
General
