SMA SUNNY CENTRAL 900CP XT - Mounting the Ventilation Plate

SMA Solar Technology AG 8 Installing the Sunny Central
Installation Manual SCCPXT-IA-D7-en-42 37
8.6 Mounting the Ventilation Plate
The guide rails for the ventilation plate are located in the floor area of the inverter cabinet.
Procedure:
• Slide the ventilation plate into the guide rails in the inverter cabinet. The ventilation grid in the ventilation plate should
be facing the rear panel.
☑ The ventilation plate is flush with the Sunny Central.
✖ The ventilation plate will not go all the way in?
• Grasp the ventilation plate from underneath and press the middle part upwards while sliding it in.