SMA Solar Technology AG Troubleshooting/Problem Solving
Technical Description SI2012_2224-TEN082311 187
E621 relay 2 on slave 2 open
E622 relay 2 on slave 2 closed
E625 digital input OFF (low)
E626 digital input ON (high)
E627 Digital Input Slave 1 to OFF (low) (not active)
E628 Digital Input Slave 1 to ON (High) (not active)
E629 Digital Input Slave 2 to OFF (low) (not active)
E630 Digital Input Slave 2 to ON (High) (not active)
Category SYS
E705 device start
E706 Set Date Time (Recording is done with "old" time)
E707 new system configured in the QCG
E708 Part 1 of the firmware updated (entry of the "old" version)
E709 Part 2 of the firmware updated (entry of the "old" version)
E711 MMC/SD card inserted
E712 Sunny Remote Control 1: parameter update
E715 Sunny Remote Control 1 activated
E851 First SIC40 has been detected
E852 Second SIC40 has been detected
E853 Third SIC40 has been detected
E854 Fourth SIC40 has been detected
Display
number
Description
To Next Page
Loading...
