EasyManua.ls Logo

SMA Sunny Island 2012 - Communication with External Devices

SMA Sunny Island 2012
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Sunny Island Electrical Connection SMA Solar Technology AG
56 SI2012_2224-TEN082311 Technical Description
7.5.2 Communication With External Devices
You can connect SMA communication devices (e.g., Sunny Boy Control, Sunny WebBox) or a PC
with the appropriate software to a communication interface. A detailed wiring diagram can be
found in the communication device manual, the software, or on the Internet at www.SMA.de.
This wiring diagram includes:
Details on the required cable type
Which of the Sunny Island's connections are used
Whether or not the communications cables must be terminated
Whether the PE needs to be connected to the cable shield
You can incorporate an RS485 communication interface into the Sunny Island.
Information
Communication via Powerline/Powerline modem (NLM) is not possible in an island grid
system.
NOTICE!
Electrostatic discharges may damage the communications interface.
When working on the Sunny Island and when handling the components observe all
ESD safety regulations.
Eliminate static charge by touching the grounded metal casing.
Only then should you begin any work.

Table of Contents

Related product manuals