Parameter List Overview SMA Solar Technology AG
166 SI2012_2224-TEN082311 Technical Description
For a detailed description of the "150# Meter Compact" menu see section 10.3.4 "Meter
Compact" (Page 105).
17.2 Adjustable System Parameters
144# SIC40 3
144 01 Sic3PvPwr W PV power of third SIC40
144 02 Sic3PvVtg V PV voltage of third SIC40
144 03 Sic3BatVtg V Battery voltage of third SIC40
144 04 Sic3BatCur A Battery current of third SIC40
144 07 Sic3HsTmp °C Temperature of third SIC40's heat sink
144 09 Sic3SWVers – SW version number SIC-PB
145# SIC40 4
145 01 Sic4PvPwr W PV power of fourth SIC40
145 02 Sic4PvVtg V PV voltage of fourth SIC40
145 03 Sic4BatVtg V Battery voltage of fourth SIC40
145 04 Sic4BatCur A Battery current of fourth SIC40
145 07 Sic4HsTmp °C Temperature of fourth SIC40's heat sink
145 09 Sic4SWVers – SW version number SIC-PB
NOTICE!
Damage due to mistakenly entered values.
Directly after pressing the knob, operating values set this way can be changed. It could
happen that wrong entries for these parameter values cannot be corrected quickly
enough.
• Only qualified personnel should change and set system parameters.
• Parameters marked with (Stby) are to be changed only when the Sunny Island is
in standby mode.
Menu
nr.
Parame
ter.Nr.
Parameter Name Range/Unit Description
To Next Page
Loading...
