EasyManua.ls Logo

SMA Sunny Island 2012 - Page 190

SMA Sunny Island 2012
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting/Problem Solving SMA Solar Technology AG
190 SI2012_2224-TEN082311 Technical Description
Category SYS
W702 1 internal restart
F703 3 Time limit exceeded during internal processing
F704 4 DSP invalid calibration
F705 4 Watchdog DSP triggered
F706 4 watchdog meter has expired (watchdog triggered several times in succession)
F707 4 watchdog meter on slave 1 has expired (watchdog triggered several times in succession)
F708 4 watchdog meter on slave 2 has expired (watchdog triggered several times in succession)
F709 4 watchdog meter on slave 3 has expired (watchdog triggered several times in succession)
F710 4 autostart counter expired (several autostarts in succession)
F711 2 DSP hardware error
F712 2 internal monitoring electronics (HTSS error)
W713 1 watchdog triggered
F714 2 internal overvoltage
F722 3 Short circuit in battery temperature sensor
F723 3 Defective cable in battery temperature sensor
W738 1 Synchronization was not conducted
F739 3 internal device communication BFR-DSP missing
F740 3 internal device communication BFR-DSP missing on slave 1
F741 3 internal device communication BFR-DSP missing on slave 2
F743 3 internal device communication BFR-DSP missing
W753 1 Invalid date (date is set automatically when launched)
W755 1 Battery preservation mode level 1
W756 1 Battery preservation mode level 2
W757 1 Battery preservation mode level 3
F762 4 Short circuit or ruptured cable on transformer temperature
F766 4 Short circuit or ruptured cable on transformer temperature sensor/inverter
W770 1 Short circuit at the 24 V DC-output
W851 1 Battery connection polarity reversed or short-circuit at first SIC40
W852 1 Battery excess voltage (>65 V) at first SIC40
W853 1 PV generator excess voltage at first SIC40
W854 1 PV voltage absent or short-circuit at first SIC40
W855 1 Sensor fault or temperature deficit at first SIC40
Display
number
Level Description

Table of Contents

Related product manuals